EonRAID 2510F - Infotrend EonRAID 2510F - 1U Profile Fibre-to-Fibre RAID Controller Head...
- Part Number:
- EonRAID 2510F
- Model Number:
- EonRAID 2510F
- Make:
- INFOTREND
- Lead Time:
- Available
- Qty In Stock:
- Available
Infotrend EonRAID 2510F - 1U Profile Fibre-to-Fibre RAID Controller Head Simple Type: System
The EonRAID 2510F is what you need for the 2Gb/s Fibre-Fibre RAID storage applications. It is designed for achieving the highest level of data availability, perfor-mance, and storage sharing. Its modular design minimizes the time for maintenance and adds scalability in the SAN environ-ments where the demands for more capacity and higher performance can never cease. It is a durable subsystem that can be easily configured and operated with the cross-platform GUI. It comes with complete component redundancy and FC support, including that for dual-loops and multi-host configurations.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 2Gbit Fibre-to-Fibre; FC-AL, point-to-point, and switched fabric
- 4 or 6 redundant channels in the dual-active redundant mode up to 12 FC channels in the dual-single mode
- Battery-protected cache memory; architecturally supports up to 1GB
- Full-featured active-active redundancy with synchronized cache
- LUN Masking - RAID-based and centralized access management in SAN
- Modular and hot-swappable design of all critical components. Designed for No Single Point of Failure
Specifications
- Fault Detection, Monitoring, And Recovery: S.E.S. and ISEMS (Infortrend Simple Enclosure Management Service) enclosure device monitoring. Controller self-diagnostics. Battery backup support. Bad Block Handling: recovering data from damaged sectors and skipping bad sectors during the degrade mode rebuild. SMART support: clone failing drive with spare or replace it online, reaction schemes configurable. Clustering support. Parity background checks and corrections.
- Host/Drive Interfaces: Up to 32 LUNs per host ID. FC-AL, support for fabric log-on, FL_Port. switch attachment, and F_Port support
- Management: Firmware-embedded Java-based GUI RAID manager over in-band or out-of-band connection featuring global manageability; real-time event notification and monitoring. Firmware-embedded manager via RS-232 port (PS-2)
- Physical/Electrical: Altitude Sea level to 10,000 ft
- Physical/Electrical: Input Voltage +90V ~ +240V AC (Auto-switching)
- Physical/Electrical: Interfaces 2Gbit Fibre SFP ports, LAN port, serial port
- Physical/Electrical: Operating Temperature 5 to 44C
- Physical/Electrical: Power Consumption 150W
- Physical/Electrical: Relative Humidity 10-95%, non-condensing
- RAID Controller: 400MHz PowerPC 750CXe with an internal L2 cache of 256Kb. Separate 64-bit/66MHz PCI bus architecture. Infortrend proprietary ASIC chipsets with hardware XOR. One Gigabyte maximum cache size on one DIMM socket with ECC support. Advanced caching algorithms: Intelligent read-ahead, multi-threaded, predictive read-ahead, optimized sorted and group writes. Online firmware upgrade in redundant mode; automatic synchronization of firmware versions.
- RAID Operation: Supported RAID levels: 0, 1(0+1), 3, 5, 10, 30, 50, NRAID, and JBOD. Online RAID expansion. Rebuild Priority, host command queue number tunable. Stripe size, caching mode per logical drive.
Applications
- None Available
Aliases
- None Available
Related Items
EonRAID 2510FS-4S
Infotrend EonRAID 2510F series, Single Controller, 4 Fibre channels- EonRAID 2510FS-6S
Infotrend EonRAID 2510F series, Single Controller, 6 Fibre channel - EonRAID 2510FD-4S
Infotrend EonRAID 2510F series, Dual-Single Controller, 8 Fibre Channels - EonRAID 2510FD-6S
Infotrend EonRAID 2510F series, Dual-Single Controller, 12 Fibre channels